The following outbound network connections are required depending on which software your Camio Box is running. Camio Boxes running Camio Flex and those running Legacy Software have different requirements — use only the section that applies to your installation.
Note: If you are unsure which software your Camio Box is running, you can check the attached label that came with your device. Camio Boxes running Camio Flex will have CamioFlex in the User Agent. If your device is registered, you can also check the User Agent on the support page.
Camio Box running Camio Flex
Ongoing Operations
These outbound connections are required while Camio Flex is running.
| Host | Port | Protocol |
|---|---|---|
| *.camio.com | 443 | TCP (HTTPS/TLS) |
| camio.com | 443 | TCP (HTTPS/TLS) |
| cam-flex-dot-camiologger.appspot.com | 443 | TCP (HTTPS/TLS) |
| *.googleapis.com | 443 | TCP (HTTPS/TLS) |
| storage.googleapis.com | 443 | TCP (HTTPS/TLS) |
| oauth2.googleapis.com | 443 | TCP (HTTPS/TLS) |
| ubuntu.pool.ntp.org | 123 | UDP (NTP) |
Installation and Updates
These outbound connections are required during initial installation and subsequent software updates. We recommend keeping these rules permanently enabled rather than opening them only on demand, so that routine security patches and container image updates can be applied without requiring firewall changes each time.
| Host | Port | Protocol |
|---|---|---|
| api.snapcraft.io | 443 | TCP (HTTPS/TLS) |
| *.snapcraftcontent.com | 443 | TCP (HTTPS/TLS) |
| fastly.cdn.snapcraft.io | 443 | TCP (HTTPS/TLS) |
| snapcraft.io | 443 | TCP (HTTPS/TLS) |
| *.docker.io | 443 | TCP (HTTPS/TLS) |
| *.docker.com | 443 | TCP (HTTPS/TLS) |
| *.gcr.io | 443 | TCP (HTTPS/TLS) |
| *.pkg.dev | 443 | TCP (HTTPS/TLS) |
| *.quay.io | 443 | TCP (HTTPS/TLS) |
| *.registry.k8s.io | 443 | TCP (HTTPS/TLS) |
| *.ghcr.io | 443 | TCP (HTTPS/TLS) |
| pkg-containers.githubusercontent.com | 443 | TCP (HTTPS/TLS) |
| us.archive.ubuntu.com | 80 | TCP (HTTP/TLS) |
| extras.ubuntu.com | 80 | TCP (HTTP/TLS) |
Camio Box running Legacy Software
The following outbound connections are required for Camio Boxes running Legacy Software.
| Host | Port | Protocol |
|---|---|---|
| *.camio.com | 443 | TCP (HTTPS/TLS) |
| camio-cameras.appspot.com | 443 | TCP (HTTPS/TLS) |
| cam-dot-camiologger.appspot.com | 443 | TCP (HTTPS/TLS) |
| cam-dot-camio-test.appspot.com | 443 | TCP (HTTPS/TLS) |
| camiologger.appspot.com | 443 | TCP (HTTPS/TLS) |
| praxis-api-dot-camio-test.appspot.com | 443 | TCP (HTTPS/TLS) |
| storage.googleapis.com | 443 | TCP (HTTPS/TLS) |
| hls.camio.com | 1935 | TCP (RTMP) |
| camio.com | 80 | TCP (HTTP/TLS) |
| ubuntu.pool.ntp.org | 123 | UDP (NTP) |
| us.archive.ubuntu.com | 80 | TCP (HTTP/TLS) |
| security.ubuntu.com | 80 | TCP (HTTP/TLS) |
| extras.ubuntu.com | 80 | TCP (HTTP/TLS) |
| 8.8.8.8 | 53 | UDP (DNS), TCP fallback |
| 8.8.4.4 | 53 | UDP (DNS), TCP fallback |
Comments